Specifications

- Model - Power Inlet R
- Material of blade - Phosphor bronze
- Plating - Platinum + Palladium
- Faston terminals - JIS F6.35（connedted to inner side of the blade）
- Body - 30% Glass filled PBT
- Weight - 13.5ｇ
- Volt/Amp - 125V・15A (CSA) - Withstand Voltage - AC 2,000V/1min
- Heat resistance - 94V-0 E45034
- Appropriate screw - 3mm x 2
- Dimension of a mounting hole - 20mm ｘ 27.5mm R4
- Applicable standard - IEC320(EN60320)/EN60320/CSA22.2 No.182.3M/JIS


Additional Information

- The Oyaide Power Inlet R is the original IEC 320 power inlet which is widely used for many types of audio equipment

- This product came to fruition as a result of Oyaide seeking to produce the best Inlet on the market

- Because it is simply composed of just a housing and blades, the quality is totally dependant on material and method of production

- The housing is made of 30% glass filler PBT which is characterised by its durability, vibration absorption, and heat resistance

- Because of the wider cable attaching portion, it makes soldering work easier compared to regular power inlets

- The blade is trimmed down from a board made by phosphor bronze and, after hand polished, it is plated by platinum and palladium plating which is the best combination Oyaide thought after repeated tests with prototypes

- Power Inret R contributes truly lossless power transmission. You would be so surprised by this small piece of technology


Features

- 30% Glass filled PBT housing - The resin which composed the housing of Power Inlet R is made by 30% Glass filled PBT. Since it is excellent in heat resistance, it makes soldering easier without deformation or damage by heat of soldering iron

- Dimension of a mounting hole - Mounting hole : （20ｘ27.5 R4）
                                                Screw : 3mm

- Precision trimming work - The blade of Power Inlet R is produced not by press working but by trimming down from a bronze board made by phosphor bronze which has already proved its quality applied for Oyaides power receptacles and power plugs

- The surface - The external part of the blade is finished by hand polishing for improvement of conduction. On the other hand, the internal part of blade purposely isn’t polished to leave asperity better adhesion of solder

- Platinum + Palladium plating - The plating on the blades of Power Inlet R is the combination of platinum and palladium which is applied to Oyaides premium models such as the R1 wall receptacle and the M1/F1 power plug/connector. It has proved its superior quality by many feedbacks and reputations from customers

- Wider cable attaching portion for easy soldering operation - The internal part of the blade which works as a cable attaching portion is made wider for easy soldering operation. It also makes internal wiring by faston terminals easier and keeps maximum contact area