PHL 3860
Midrange Driver, Very High SPL, Very High Sounding Quality
US $326.87
Qty

Applications

- Midrange transducer dedicated to the reproduction of 120-3000Hz frequencies
- Equipped with a progressive wave diaphragm for precise transcription of the mid-range band
- For horn loaded application

Features
- Power handling capacity - 250W ABS
- Reference Efficiency (1W @ 1m) - 101 dB SPL
- SPL max (continuous) - 121 dB SPL
- Usable frequency range - 120-3000 Hz
- Environmental withstanding - Outdoor

Typical Characteristics
    3860  
Rated Impedence    Z    8 Ω
Reference Efficiency (1W @ 1m) - 101 dB SPL
Usable Frequency Range 1 - 120-3000 Hz
Power Handling Capacity 2 (AES) - 250 W
Max Sound Pressure Level 3 SPL max 121 dB SPL
Min. Impedence modulus min 4.9 @ 500Hz Ω
Voice-coil Inductance @ 1 kHz e1k 0.94 mH
                                   @ 10 kHz e10k 0.54 mH
BI product BI 20.8 N/A
Moving Mass ms 0.035 Kg
 
Thiele-Small Parameters : Typical (OC Limits)
    3860  
Resonance Frequency 5 s 75 (±15) Hz
DC resistance 6 e 4.6 (±0.5) Ω
Mechanical Quality Factor ms 3.9 1
Electrical Quality Factor es 0.18 1
Total Quality Factor ts 0.17 1
Mechanical Suspension Compliance ms 130 10-6 m/N
Effective Piston Area d 0.0373 m2
Equivalent C as Air Load as 0.025 m3
Max. Linear Excursion max ±2.0 ±mm
Linear Displacement Volume d 0.075 103 m3
Half-space Efficiency   5.8 %
Unity Load Volume VasQts2 0.7 103 m3
 
Absolute Maximum Ratings
    3860  
Short term max. input voltage 7  max 100 V
Max. Excursion Before Damage dam ±5 mm
Ambient Operating Temperature   -10 to +50 °C
Storage Temperature 8   -20 to +70 °C
Environmental Conditions   Outdoor  
 
Application Information
    3430  
Air Volume Occupied by the Driver 10   2.0 103 m3
Speaker Net Mass   8.240 Kg
Recommended Reflex Box   Vb/Fb  4-6 / Sealed L/Hz
Electrical Polarity A positive voltage applied on the red terminal produces forward cone motion
 
Specification Notes
- Note 1: Allowing for energy response, excursion capability, Power spectrum and -3dB low freq, roll-off for standard reflex tuning
- Note 2 :  Established at 20°C ambient temp, according to AES2-1984 standard using IEC268-1 simulated programme signal and a 150 liter Bass-Reflex test enclosure tuned at 40Hz.
- Note 3 : Established at 1m on axis of the loudspeaker mounted in test enclosure, when driven at full AES Power Handling Capacity, including 4dB of thermal compression loss
- Note 4 : Measured at 20 mA in free air
- Note 5 : Measured at 20 mA and 20°C ambient temp. in free air conditions, after full run and rest
- Note 6 : Measured at 20°C ambient temp. QC limits are ±10%
- Note 7 : Stated in RMS voltage according to IEC 268-5
- Note 8 : Includes shipping conditions. The lower limit prevents from demagnetization
- Note 9 : Our products are classified in three categories :  Indoor, Outdoor, and Outdoor✚ for permanent outdoor use or severe conditions
- Note 10 : Calculated for front mounting on to a 18 mm thick board
Currently there are no reviews for this product.
Currently there are no questions for this product.
Similar Products
PHL 5320/B38
US $398.28
PHL 1230/B17
US $155.88
PHL 4510/B30
US $309.01
PHL 1440/X17
US $206.01