PHL 5010/B38
15" Bass Midrange Driver, Ultimate Sounding Quality
US $476.63
Qty

Applications
- This model is intended to be used in cases where neither ultimate transcription sound nor full outdoor environmental withstanding are requested
- The main use is in the field of Studio Monitoring
- Its linear pressure response up to 1kHz, together with the smooth upper roll-off 
are ideal for this application
- Recommended acoustical load is in a Reflex enclosure of 90L to 120L tuned from 40Hz to 43Hz, while usable freq. range is possible up to 600Hz depending only on the directivity compromise you agree on

Design Concept
Deflection Controlled Diaphram
- Optimized for dynamic damping
- Deflection Controlled Diaphragm technology consists in optimizing the shape and material of the diaphragm so that it works as a mechanical transmission line, to avoid breaking modes as well as mechanical threshold which destroy sound quality
- It is this leading edge technology which offers substantial sonic advantages
- Those advantages include sound coherency, fast transients, stable sound imaging, high sensitivity, wide frequency range and reduced directivity pattern

Vented Compact Magnet System
- Carefully optimized to obtain maximum transducing efficiency while avoiding unlinear behaviour such as coil inductance variation with position, flux modulation, harmonic distortion, rest position offset, air compression and off-axis voice-coil pushing
- Design incorporates a T-shaped and vented pole piece as well as a flux stabilizing ring
- It also takes into consideration demagnetization and cold temperatures

Intercooler System
- Entirely integrated into the loudspeaker itself, the Intercooler System extracts the heat produced by the Joule effect in the voice-coil
- It does so via an air flow directed through the heatsink rims of the basket by the motion of the dust-cap and the spider
- The gain brought about by this technology is over 20% of extra power, so for example, a 3" coil according to this design has the same power handling capacity as a classical 4" one

Features
- Power handling capacity - 500W ABS
- Reference Efficiency (1W @ 1m) - 97 dB SPL
- SPL max (continuous) - 120 dB SPL
- Usable frequency range - 35-2000 Hz
- Environmental withstanding - Outdoor

Architectural Specifications
Nominal Diameter - 380mm
Frame - High tensile alloy pressure die-cast basket with patented Intercooler System
Magnet System - 3" highly energized, heat extracting design with vented pole piece flux stabilizing ring
Voice Coil - High-temperature stabilized copper-clad aluminium ribbon wound on vented high-strength glass polyimide
Cone Assembly - High-strength cellulose fiber cone impregnated and coated on both sides with damped resins, fitted with fabric dome, high-speed flat, damped surround and acoustically damped rear cavity

Speaker Mass - 9.10kg

Typical Characteristics
    5010  
Rated Impedence    Z    8 Ω
Reference Efficiency (1W @ 1m) - 97 dB SPL
Usable Frequency Range 1 - 35-2000 Hz
Power Handling Capacity 2 (AES) - 500 W
Max Sound Pressure Level 3 SPL max 120 dB SPL
Min. Impedence modulus min 6.2 @ 240Hz Ω
Voice-coil Inductance @ 1 kHz e1k 1.47 mH
                                   @ 10 kHz e10k 0.61 mH
BI product BI 23.4 N/A
Moving Mass ms 0.123 Kg
 
Thiele-Small Parameters : Typical (OC Limits)
    5010  
Resonance Frequency 5 s 34 (±5) Hz
DC resistance 6 e 5.6 (±0.5) Ω
Mechanical Quality Factor ms 3.3 1
Electrical Quality Factor es 0.27 1
Total Quality Factor ts 0.25 1
Mechanical Suspension Compliance ms 180 10-6 m/N
Effective Piston Area d 0.0892 m2
Equivalent C as Air Load as 0.200 m3
Max. Linear Excursion max ±7.0 mm
Linear Displacement Volume d 0.624 103 m3
Half-space Efficiency   2.8 %
Unity Load Volume VasQts2 12. 103 m3
 
Absolute Maximum Ratings
    5010  
Short term max. input voltage 7  max 150 V
Max. Excursion Before Damage dam 12 mm
Ambient Operating Temperature   -10 to +50 °C
Storage Temperature 8   -20 to +70 °C
Environmental Conditions   Outdoor✚  
 
Application Information
    5010  
Air Volume Occupied by the Driver 10   4.3 103 m3
Speaker Net Mass   9.1 Kg
Recommended Reflex Box   Vb/Fb  110 / 40 L/Hz
Electrical Polarity A positive voltage applied on the red terminal produces forward cone motion
 


Specification Notes
- Note 1: Allowing for energy response, excursion capability, Power spectrum and -3dB low freq, roll-off for standard reflex tuning
- Note 2 :  Established at 20°C ambient temp, according to AES2-1984 standard using IEC268-1 simulated programme signal and a 150 liter Bass-Reflex test enclosure tuned at 40Hz.
- Note 3 : Established at 1m on axis of the loudspeaker mounted in test enclosure, when driven at full AES Power Handling Capacity, including 4dB of thermal compression loss
- Note 4 : Measured at 20 mA in free air
- Note 5 : Measured at 20 mA and 20°C ambient temp. in free air conditions, after full run and rest
- Note 6 : Measured at 20°C ambient temp. QC limits are ±10%
- Note 7 : Stated in RMS voltage according to IEC 268-5
- Note 8 : Includes shipping conditions. The lower limit prevents from demagnetization
- Note 9 : Our products are classified in three categories :  Indoor, Outdoor, and Outdoor✚ for permanent outdoor use or severe conditions
- Note 10 : Calculated for front mounting on to a 18 mm thick board
Currently there are no reviews for this product.
Currently there are no questions for this product.
Similar Products
PHL 1340/B17
US $155.23
PHL 3430
US $279.00
PHL 1120/E17
US $161.38
PHL 1130/E17
US $161.38