PHL 2520
Midrange Driver, High SPL, Very High Sounding Quality
CA $253.22
Qty

Applications

- Midrange transducer dedicated to the reproduction of 200-5000Hz frequencies
- Equipped with a progressive wave diaphragm for precise transcription of the midrange band
- Usable for either direct radiation in small volumes from 3L to 4Lor for horn loaded application

Features
- Power handling capacity - 200W ABS
- Reference Efficiency (1W @ 1m) - 100 dB SPL
- SPL max (continuous) - 119 dB SPL
- Usable frequency range - 200-5000 Hz
- Environmental withstanding - Outdoor

Typical Characteristics
    2520     2530      
Rated Impedence    Z    8 16 Ω
Reference Efficiency (1W @ 1m) - 100 100 dB SPL
Usable Frequency Range 1 - 200-5000 200-5000 Hz
Power Handling Capacity 2 (AES) - 200 200 W
Max Sound Pressure Level 3 SPL max 119 119 dB SPL
Min. Impedence modulus min 6.4 @ 450Hz 12.9 @ 450Hz Ω
Voice-coil Inductance @ 1 kHz e1k 1.00 2.06 mH
                                   @ 10 kHz e10k 0.57 0.99 mH
BI product BI 14.3 20.9 N/A
Moving Mass ms 0.018 0.0182 Kg
 
Thiele-Small Parameters : Typical (OC Limits)
    2520    2530     
Resonance Frequency 5 s 90 (±13) 110 (±32) Hz
DC resistance 6 e 6.0 (±0.6) 11.6 (±1.2) Ω
Mechanical Quality Factor ms 4.0 2.5 1
Electrical Quality Factor es 0.31 0.37 1
Total Quality Factor ts 0.28 0.30 1
Mechanical Suspension Compliance ms 170 115 10-6 m/N
Effective Piston Area d 0.0238 0.0241 m2
Equivalent C as Air Load as 0.0135 0.0093 m3
Max. Linear Excursion max ±2.0 2.00 mm
Linear Displacement Volume d 0.048 0.048 103 m3
Half-space Efficiency   3.1 3.6 %
Unity Load Volume VasQts2 1.1 0.8 103 m3
 
Absolute Maximum Ratings
    2520    2530     
Short term max. input voltage 7  max 80 110 V
Max. Excursion Before Damage dam ±4 4 mm
Ambient Operating Temperature   -10 to +50 °C
Storage Temperature 8   -20 to +70 °C
Environmental Conditions   Outdoor  
 
Application Information
    2520    2530     
Air Volume Occupied by the Driver 10   0.980 103 m3
Speaker Net Mass   4.480 Kg
Recommended Reflex Box   Vb/Fb  3-4 / Sealed L/Hz
Electrical Polarity A positive voltage applied on the red terminal produces forward cone motion
 
Specification Notes
- Note 1: Allowing for energy response, excursion capability, Power spectrum and -3dB low freq, roll-off for standard reflex tuning
- Note 2 :  Established at 20°C ambient temp, according to AES2-1984 standard using IEC268-1 simulated programme signal and a 150 liter Bass-Reflex test enclosure tuned at 40Hz.
- Note 3 : Established at 1m on axis of the loudspeaker mounted in test enclosure, when driven at full AES Power Handling Capacity, including 4dB of thermal compression loss
- Note 4 : Measured at 20 mA in free air
- Note 5 : Measured at 20 mA and 20°C ambient temp. in free air conditions, after full run and rest
- Note 6 : Measured at 20°C ambient temp. QC limits are ±10%
- Note 7 : Stated in RMS voltage according to IEC 268-5
- Note 8 : Includes shipping conditions. The lower limit prevents from demagnetization
- Note 9 : Our products are classified in three categories :  Indoor, Outdoor, and Outdoor✚ for permanent outdoor use or severe conditions
- Note 10 : Calculated for front mounting on to a 18 mm thick board
Currently there are no reviews for this product.
Currently there are no questions for this product.
Similar Products
PHL 1360/B17
CA $205.29
PHL 4530/B30
CA $463.94
PHL 1660/E172
CA $303.87
PHL 2010/B201
CA $199.87