PHL 2420
Bass Midrange Driver, High Sensitivity, High Sounding Quality
CA $254.76
Qty

Applications
- Bass midrange transducer dedicated to the reproduction of 70-3000Hz frequencies
- The medium power handling capacity version of the 2400
- Its design gives priority to bass extension

Features
- Power handling capacity - 200W ABS
- Reference Efficiency (1W @ 1m) - 94 dB SPL
- SPL max (continuous) - 113 dB SPL
- Usable frequency range - 70-3000 Hz
- Environmental withstanding - Outdoor

Typical Characteristics
    2420  
Rated Impedence    Z    8 Ω
Reference Efficiency (1W @ 1m) - 94 dB SPL
Usable Frequency Range 1 - 70-3000 Hz
Power Handling Capacity 2 (AES) - 200 W
Max Sound Pressure Level 3 SPL max 113 dB SPL
Min. Impedence modulus min 5.6 @ 370Hz Ω
Voice-coil Inductance @ 1 kHz e1k 0.85 mH
                                   @ 10 kHz e10k 0.46 mH
BI product BI 12.9 N/A
Moving Mass ms 0.025 Kg
 
Thiele-Small Parameters : Typical (OC Limits)
    2420  
Resonance Frequency 5 s 72 (±10) Hz
DC resistance 6 e 5.4 (±0.6) Ω
Mechanical Quality Factor ms 4.5 1
Electrical Quality Factor es 0.37 1
Total Quality Factor ts 0.34 1
Mechanical Suspension Compliance ms 200 10-6 m/N
Effective Piston Area d 0.0219 m2
Equivalent C as Air Load as 0.0130 m3
Max. Linear Excursion max ±5.0 mm
Linear Displacement Volume d 0.110 103 m3
Half-space Efficiency   1.3 %
Unity Load Volume VasQts2 1.5 103 m3
 
Absolute Maximum Ratings
    2420  
Short term max. input voltage 7  max 80 V
Max. Excursion Before Damage dam ±10 mm
Ambient Operating Temperature   -10 to +50 °C
Storage Temperature 8   -20 to +70 °C
Environmental Conditions   Outdoor  
 
Application Information
    2420  
Air Volume Occupied by the Driver 10   0.720 103 m3
Speaker Net Mass   3.020 Kg
Recommended Reflex Box   Vb/Fb  15/70 L/Hz
Electrical Polarity A positive voltage applied on the red terminal produces forward cone motion
 
Specification Notes
- Note 1: Allowing for energy response, excursion capability, Power spectrum and -3dB low freq, roll-off for standard reflex tuning
- Note 2 :  Established at 20°C ambient temp, according to AES2-1984 standard using IEC268-1 simulated programme signal and a 150 liter Bass-Reflex test enclosure tuned at 40Hz.
- Note 3 : Established at 1m on axis of the loudspeaker mounted in test enclosure, when driven at full AES Power Handling Capacity, including 4dB of thermal compression loss
- Note 4 : Measured at 20 mA in free air
- Note 5 : Measured at 20 mA and 20°C ambient temp. in free air conditions, after full run and rest
- Note 6 : Measured at 20°C ambient temp. QC limits are ±10%
- Note 7 : Stated in RMS voltage according to IEC 268-5
- Note 8 : Includes shipping conditions. The lower limit prevents from demagnetization
- Note 9 : Our products are classified in three categories :  Indoor, Outdoor, and Outdoor✚ for permanent outdoor use or severe conditions
- Note 10 : Calculated for front mounting on to a 18 mm thick board
Currently there are no reviews for this product.
Currently there are no questions for this product.
Similar Products
PHL 3430
CA $371.22
PHL 2520
CA $254.76
PHL 5010/B38
CA $634.17
PHL 4510/B30
CA $409.44